Amerigo MXT All Around
Body unit
-
Outer dimensions of the cabin
- Length 5400 mm, width 2360 mm, height 2105 mm
Inner dimensions of the cabin - Length 5280 mm, width 2240 mm, height 1950 mm
Frame assembly - 3-point kinematic attachment with main and flex mounts
for stress-free body coupling to the torsion elastic chassis frame
Body unit construction - Self supporting UNICAT sandwich plate panels of fibreglass composite
- Panel connections made by adhesive bond to custom extrusions
eliminates metallic heat conduction paths - Matched thermal coefficients of expansion prevent distortion with changes in temperature
- Wall thickness 60 mm with polyurethane foam insulation, 3 mm fibreglass reinforced polyester outer surface, 2 mm fibreglass reinforced polyester inner surface
- Insulation rating 0.44 W/sqm K
- Bottom panel with integrated welded steel frame and surfaces of fibreglass reinforced polyester
Overhead - Well insulated, expedition proven and maintenance free
- Fullsize roof hatch over the bed
- Double sealed with heavy duty locks with seal compression
- Stainless steel hinges
- Stainless steel lifting and locking device
Access to drivers cab - Highly flexible waterproof bellows coupling
Entrance door - Entrance door constructed of fibreglass composite panels and frames
- Thickness of doors 60 mm
- Double sealed doors with heavy duty locks with seal compression
- Stainless steel hinges throughout
- Additional retractable bolts at top and bottom of entrance door
Windows - Burglarproof, scratchproof top-hinged windows with fibreglass frames
- Double insulated thermal window glass
- Double seals with heavy duty lock
- Stainless steel hinges throughout
- Stainless steel lifting and locking device
- Shutters and mosquito nets
Skylights - Burglarproof, skylights with aluminium frames
- 10 mm acrylic glass
- Heavy duty lock
-
Seating area
- Seating area for 4-6 persons, with adjustable swiveling table on pedestal in the rear of the cabin
- Seating unit converts to additional double bed
Beds - Double bed with suspension, ventilation and comfortable mattress in the overhead
- 1500 x 2000 mm
Sanitary room - Combined shower and toilet room with door to isolate from living area
- Cupboard with wash basin
- Wall cupboard with mirror
Kitchen - Countertop with integrated stainless steel sink
- LPG 3-flame stove
- 85 litres fridge with freezer rated 3 stars
- Kitchen cabinet with drawers on ball bearings
- Overhead cupboards above kitchen
Storage - Wardrobe
- Stainless steel exterior storage boxes
Workmanship - All furniture is built to the highest cabinet making standard
made of wood core plywood using heavy duty locks and hinges - Finishes may be specified by customer
Lay out - Design and colour of floor, walls and ceiling may be chosen by customer
- Walls and ceiling are painted with multiple coats
- Upholstery made of fabric
-
Electrical equipment
- Control panel for power management and monitoring of liquid levels
- Battery main switch, safety cut out
- DC power supplied by AGM battery bank
- Battery capacity: 12V - 840Ah
- DC-DC charger, charge rate: 12V 100A
- AC-DC charger: 12 V- 50 A
- Inverter 12V / 230V, max output 3 kW
- International shore power connectors 90V -260V AC (45Hz-65Hz)
- Power plugs for 12V DC and 230V AC
Music system - Stereo music system with CD player and MP3 / iPod input
- Speakers in the seating area
Lighting - LED eiling lights above the table, kitchen, bed, bath and shower
- Lights for outside storage compartment
- Reading lights at the bed and the seating area
Water supply - 480 litres freeze-proof drinking water tanks
- All plumbing is insulated to prevent freezing
- Waste water tank, capacity 80 litres
- 22 litres hot water heat-exchanger
- Outside shower
LPG supply - 2 x 11 kg LPG cylinders in sealed LPG compartment
Toilet - Sealand porcelain toilet with water flushing
- Freeze-proof sewage holding tank, capacity 90 liters
Heating system - Diesel powered warm water central heating (5 kW)
- High radiant heat share due to radiators in living area and sanitary room
- Additional heater in bed area
-
List price serial equipment without VAT (Export)
- 231.343 €
- Vehicle immatriculation charges depend on local requirements and are not included
Options
Body unit
- Mosquito net for entrance door
- Bicycle carrier
- Special painting
- Folding kitchen countertop
- Upholstery made of leather or ALCANTARA
- Solar power system
- Generator
- Roof fan
- Air conditioning
- Washing machine
- Water filtration system
